Ihe na-asa efere, ahịrị ndị na-emepụta ice, na igwe ịsa ahụ dara idei mmiri¶

Igwe na-asa akwa gbawara agbawa, eriri ntinye ihe nkesa efere gbawara agbawa, ma ọ bụ ọkpọkọ rọba friji gbawara agbawa nwere ike ịgbanye n'etiti lita 15 na 45 (galọn 4 ruo 12) nke mmiri na-arụ ọrụ kwa nkeji ozugbo banye na kichin gị ma ọ bụ n'ala ụlọ ịsa ákwà. N'ihi na ahịrị mmiri nke ụlọ na-anọgide n'okpuru nrụgide obodo na-aga n'ihu nke 275 ruo 550 kilopascals (40 ruo 80 pound kwa square inch) awa 24 kwa ụbọchị: ọbụlagodi mgbe agbanyụrụ ngwa ahụ n'onwe ya: ụgbụ a na-ejighị n'aka nwere ike ịhapụ ihe karịrị 2,000 lita (500 galọn) mmiri n'ime otu awa, na-akụda ụlọ elu, na-akụda ụlọ elu. ihe ize ndụ nke ujo eletrik.

Ntuziaka a na-enye gị ngwa ngwa, usoro nzọụkwụ iji chọpụta ihe ize ndụ eletrik tupu ịbanye n'ala mmiri mmiri, chọta ma mechie valvụ shutoff nke ọma maka igwe efere gị, onye na-eme friji, ma ọ bụ igwe ịsa ahụ n'ime ihe na-erughị sekọnd iri isii, kwụsị tub na-ejubiga ókè, ma wepụ mmiri tọrọ atọ n'okpuru igbe na subfloors tupu 24 na-egbu egbu amalite ịmalite n'ime awa 8.

Mee nke a ugbu a¶

1. ** Kwụsị n'ọnụ ụzọ akọrọ wee lelee ọkwa mmiri megide ebe ọkụ eletrik, eriri ọkụ, na moto ngwa ngwa tupu ị banye n'ala mmiri mmiri **: Akwụsịla ụkwụ efu ma ọ bụ akpụkpọ ụkwụ mmiri mmiri n'ime mmiri guzoro nke na-emetụ ọkụ eletrik nke dị n'ala, eriri ndọtị, ma ọ bụ compressor / moto nke ala nke friji, igwe na-asa efere, ọkụ eletrik ndu).
2. ** Gbanyụọ sekit maka ime ụlọ idei mmiri na ngwa na-agbapụta na ogwe ọkụ eletrik gị nke mbụ **: Ije ije na igbe ọkụ eletrik gị akpọnwụ ma na-atụgharị ihe ndị na-emebi emebi maka ** efere efere / mkpofu **, ** ihe nrite kichin **, friji ***, ma ọ bụ ** igwe na-asa akwa / igwe na-ekpo ọkụ na-ewepụ ihe ọ bụla ọkụ eletrik na-akwụsị ozugbo. nke na-agbasi mbọ ike na-agbaba mmiri n'ime ọdọ mmiri na-ejubiga ókè.
3. ** Chọta ma mechie valvụ mmiri na-emechi ihe raara onwe ya nye (ma ọ bụ mechie valvụ mmiri isi ụlọ ma ọ bụrụ na valvụ nkwụnye ahụ dị n'azụ ngwa ngwa ma ọ bụ rapaara) ***:
   • ** Maka igwe na-asa efere ***: Mepee ọnụ ụzọ kabinet ozugbo ** n'okpuru sink kichin *** (ọ bụghị n'azụ ebe a na-asa efere) wee tụgharịa ** valvụ nkwụsịtụ mmiri ọkụ ** n'akụkụ elekere ruo mgbe ọ kwụsịrị (ma ọ bụ slide valvụ bọọlụ ntụgharị nkeji nkeji iri itoolu na-eji ogo 90 gafee ọkpọkọ).
   • ** Maka igwe na-asa akwa ***: rute n'azụ ma ọ bụ n'elu igwe na-asa akwa na igbe mpụta mgbidi wee tụgharịa ma ọpịpị ọkụ na oyi na-atụ n'akụkụ elekere, ma ọ bụ dotuo njikwa ihe mkpuchi otu lever.
   • ** Maka onye na-eme friji / onye na-enye mmiri mmiri **: Lelee n'okpuru ebe a na-esi nri kichin, n'ime ụlọ dị n'akụkụ, ma ọ bụ na ọkpọkọ mmiri oyi na okpuru ulo ozugbo n'okpuru ngwa nju oyi maka obere agịga / ụzọ ntụgharị nke valve na-eri nri 6-millimeter (¼-inch) ọla kọpa ma ọ bụ tube plastik: ma ọ bụ mechie ** isi ụlọ mmiri na-emechi valverest ** 0 ozugbo karịa w) refrjiraeto si na mgbidi mgbe mmiri sprays.
4. ** Mepee eriri sink dị nso wee wụsa ụlọ mposi dị n'ala kacha ala nke ụlọ gị ma ọ bụrụ na ị ga-emechi valvụ mmiri isi ụlọ ***: Imeghe mgbata mmiri kachasị dị ala na-eme ka ahịrị ọkpọkọ ụlọ n'ime sekọnd nke mere na kọlụm mmiri fọdụrụnụ dabara n'ime ọkpọkọ elu ụlọ na-asọba n'enweghị nsogbu n'ime sink kama ịga n'ihu na-awụpụ n'ọkụ ngwa ngwa.
5. ** Were mmiri na-agbasa gburugburu ozugbo na-eji akwa akwa akwa akwa akpọrepu, akwa rọba na oghere ụlọ ahịa mmiri / akọrọ **: dachie ọnụ ụzọ na-eduga n'okporo ụzọ osisi siri ike, ebe obibi kapeeti, ma ọ bụ ihe ikuku HVAC nke mbụ, dịka ibunye mmiri na kichin tiled ma ọ bụ ime ụlọ ịsa ahụ na-azọpụta puku kwuru puku dollar na nnọchi ala ụlọ.
6. ** Were foto na vidiyo nke eriri gbawara agbawa, ogologo mmiri kwụ ọtọ, na mkpado nọmba ngwa ngwa tupu ị tụfuo akụkụ ọ bụla gbajiri agbaji **: Ndị na-ahụ maka mkpuchi chọrọ ihe akaebe foto nke "mwepu mberede na mberede" (ma ga-enyochakarị eriri ahụ gbawara agbawa n'onwe ya maka ntinye aka megide hose ma ọ bụ onye nrụpụta ngwa) iji kwado ebubo mmebi ihe onwunwe gị.

Mpempe akwụkwọ mkpebi: ịkwụsị idei mmiri ngwa na ịchọpụta isi mmalite¶

flowchart TD
    Start["Ide mmiri sitere na igwe efere, igwe ịsa akwa, ma ọ bụ ngwa nju oyi"] --> ElecCheck{"Ọ bụ ebe mmiri na-emetụ mmiri, eriri, ma ọ bụ moto ngwa?"}
    ElecCheck -->|"Ee: Ihe ize ndụ eletrik dị ugbu a"| MainBreaker["Azọpụla n'ime mmiri: Gbanyụọ ndị na-emebi ọnụ ụlọ / ngwa na nnukwu panel ma mechie Valve mmiri nke nnukwu ụlọ."]
    ElecCheck -->|"Mba: Puddle dị omimi pụọ na wiring"| KillPower["Gbanyụọ ihe na-emebi ngwa / jiri aka na akpụkpọ ụkwụ kpọrọ nkụ nke ọma"]
    MainBreaker --> IdentifySource{"Ebee ka mmiri ahụ si abịa?"}
    KillPower --> IdentifySource
    IdentifySource -->|"Ịgbasa n'azụ ngwa ngwa (ọbụlagodi na agbanyụrụ ike)"| SupplyBurst["Ọkụ Mkpọnye Agbawara ma ọ bụ ahụ mgbawa valvụ mbata gbawara agbawa"]
    SupplyBurst --> CloseValve["Mechie Nkwụsị nkuku n'okpuru, Valve igbe mgbidi na-asa ákwà, ma ọ bụ Mkpuchi Main House"]
    IdentifySource -->|"Tub na-ejupụta n'elu ala ka ọ na-ejuputa"| StuckInlet{"Mmiri ọ na-akwụsị ịbanye tub mgbe agbanyụrụ ọkụ eletrik?"}
    StuckInlet -->|"Ee: Mmiri Na-akwụsị Mgbe Ebibiri Ike"| BadFloat["Mgbanwe Nrụgide Ọkwa Mmiri ezighi ezi ma ọ bụ Stuck Float Switch"]
    StuckInlet -->|"Mba: Mmiri na-anọgide na-ejuputa tub ọbụna na ike gbanyụọ"| MechStuck["Mpekere kpọsara n'ime Electric Solenoid Inlet Valve Diaphragm: Ga-emenyụrịrị Valve mmiri"]
    IdentifySource -->|"Ịkwado Mmiri Sudsy/Uru Unyi n'oge okirikiri mmiri"| DrainFlood["Ọkpụkpọ mmiri nke gbawara agbawa, ọkpọkọ kwụchiri, ma ọ bụ oghere ikuku / mkpofu ahịhịa egbochiri"]
    CloseValve --> Extract["Malite mmịpụta mmiri mberede n'ime awa 1: dọpụta mkpịsị ụkwụ wee tọọ ihe na-ekpochapụ ọkụ."]
    BadFloat --> Extract
    MechStuck --> Extract
    DrainFlood --> Extract

Otu esi achọta na mechie kichin ọ bụla na mmiri ịsa ákwà shutoff valve na 60 sekọnd¶

N'etiti oke iju mmiri, ndị nwe ụlọ na-ala n'iyi nkeji iri na-ele anya n'ebe na-ezighị ezi maka valvụ mmiri nke ngwa: dị ka ịnwa ịchọta valvụ mmiri n'azụ ebe a na-asa efere na-arụ ọrụ mgbe valvụ dị n'ezie na kabinet dị n'akụkụ ọnụ ụzọ n'okpuru kichin kichin. Jiri matriks chọta ebe a ka ọ gaa ozugbo na valvụ aka nri:

Ntuziaka nchọpụta: gịnị kpatara ngwa ahụ ji jupụta, ma ị nwere ike ịwụpụ tub ahụ n'enweghị nsogbu?¶

Ozugbo a na-emechi mmiri na-abata na ike eletrik na-akwụsị n'enweghị nsogbu, chọpụta * nke akụkụ * nke ngwa ahụ dara: akụkụ nke nrụgide dị elu, mgbanaka ọkwa dị n'ime, ma ọ bụ akụkụ nkwụsịtụ dị ala: na-agwa gị ihe ị ga-eme na mmiri ka nọ ọdụ n'ime igwe.

1. The "na-na-ejuputa ọbụna na ike unplugged" ọdịda (Stuck Solenoid Inlet Valve)¶

Ọtụtụ ndị nwe ụlọ na-atụ ụjọ mgbe igwe na-asa efere ma ọ bụ igwe ịsa ahụ malitere na-ejupụta n'ala, ya mere, ha pịa bọtịnụ "Kagbuo / Gbanyụọ" ma ọ bụ ọbụna wepụ ngwa ahụ, ** ma mmiri dị ọcha na-aga n'ihu na-awụba n'ime tub **.

• ** Gịnị kpatara nke a ji eme ***: Igwe a na-asa efere ọgbara ọhụrụ na igwe ịsa ahụ na-eji igwe eletrik arụ ọrụ ** solenoid water inlet valve ***. Dị ka ọ na-adịkarị, mmiri siri ike nke dị n'ime na nrụgide mmiri na-ejide diaphragm rọba mechiri n'ime valvụ ahụ ruo mgbe kọmputa na-eziga voltaji eletrik ka imeghe ya. Agbanyeghị, ọ bụrụ na obere ọka nke nchara, aja ma ọ bụ ọnụ ọgụgụ calcium sitere na ọkpọkọ ezinụlọ gị na-asa n'ime valvụ wee banye n'ọdụ ụgbọ mmiri microscopic diaphragm, ma ọ bụ ọ bụrụ na ahụ valvụ fiberglass na-agbawa site na afọ ma ọ bụ hama mmiri, ** valvụ ahụ na-emeghe n'ụzọ zuru ezu.
• ** Ndozi ozugbo ***: Ikpopu igwe agaghị akwụsị valvụ ntinye nke mebere ma ọ bụ gbawara agbawa. Ị ** ga-emechi valvụ mmiri na-emechi emechi n'okpuru sink, n'azụ onye na-asa ákwà, ma ọ bụ na isi ụlọ na-emechi iji kwụsị mmiri ahụ, wee dochie mgbakọ valvụ mmiri na-adịghị mma (ihe dị ọnụ ala 25 ruo 60 USD nke a na-agbanye n'ebe nri na-agbanye n'elu ala nke efere efere ma ọ bụ azụ nke onye na-asa ákwà).

2. Otu esi akpalite mgbapụta mgbapụta mberede (Ọ bụrụ na tub ahụ jupụtara n'ọnụ)¶

Ọ bụrụ na mmiri ahụ agbanyụrụ na iju mmiri ahụ bụ ihe njuju (dị ka iji ncha efere mmiri mgbe niile n'ime efere efere, nke na-emepụta ugwu suds nke na-ejupụta gasket ọnụ ụzọ ala, ma ọ bụ tube mgbanaka nrụgide), ị ka nwere 10 ruo 60 lita (3 ruo 15 galọn) nke mmiri na-anọdụ n'ime ngwa ngwa.

• ** Ọ bụrụ na a na-ehichapụ ala dị n'akụkụ ngwa ahụ ugbu a na-ehichapụ ma dị mma **: Ị nwere ike iweghachi ike na onye na-agbaji obere oge wee pịa ma jide bọtịnụ "Kagbuo / Drain" na efere efere ma ọ bụ họrọ "Drain & Spin" okirikiri na igwe ịsa ahụ. N'ihe fọrọ nke nta ka ọ bụrụ ihe niile na-asa efere, ịpị ma jide bọtịnụ Malite / Tọgharia ma ọ bụ Kagbuo maka ** 3 sekọnd ** ozugbo ịkagbu okirikiri ịsa ahụ wee nye iwu mgbapụta ọkụ eletrik ka ọ na-agba ọsọ maka sekọnd 90, na-agbanye mmiri mmiri kwụ ọtọ ozugbo n'ime sink drain pipe.
• ** Ọ bụrụ na akpọchiri ọnụ ụzọ igwe na-ebu ibu n'ihu juputara na mmiri wee gbanyụọ ike (ma ọ bụ gbachie mgbapụta mgbapụta) ***:
  1. Mepee obere akụkụ akụkụ anọ ** nweta oghere dị na akuku ihu ala dị ala ** nke igwe ịsa ahụ (n'akụkụ ala).
  2. N'ime ime ụlọ ahụ, na-esote nzacha ọnyà mkpirisi mkpụrụ ego, chọọ rọba ojii dị gịrịgịrị ** eriri mmiri mgbapu mberede *** nke nwere plọg rọba.
  3. Debe mpempe akwụkwọ na-emighị emi ma ọ bụ obere ihe ngosi dị n'ala, dọpụta eriri mmiri rọba dị mkpa n'elu pan ahụ, wepụ plọg plastik, wee kpochaa tub ahụ otu panful n'otu oge n'ime ịwụ tupu ị kpughee okpu nzacha mgbapụta isi gburugburu (ọ bụrụ na ị kpughee nnukwu mkpuchi mgbapụta gburugburu buru ibu na-ebupụghị eriri ahụ dị mkpa, 25 lita / 6 galọn mmiri ga-agafe mmiri gị ozugbo).
  4. Ozugbo mmiri tub ahụ wụsara n'okpuru ọkwa ọnụ ụzọ iko, chere nkeji 2 maka mkpọchi ọnụ ụzọ ọkụ ka ọ pịa meghee, ma ọ bụ gbadaa nwayọ na rọba akwụkwọ ntuziaka ** taabụ / eriri ntọhapụ ọnụ ụzọ mberede *** gbadara n'ime oghere nzacha mmiri nke ala.

3. Gịnị mere ị ga-eji dochie ịkpọpu "Saddle Valves" na nwa roba hoses ozugbo¶

Akụkụ abụọ a ma ama nke ọkpọkọ na-akpata ọnụ ọgụgụ buru ibu nke nnukwu kichin na idei mmiri na-asa ákwà:

• ** valvụ ihe eji anọkwasị agịga na-amapu onwe ya na ndị na-eme ice friji ***: Ruo ọtụtụ iri afọ, ndị nrụnye jikọtara ndị na-eme ice refrjiraeto site na ịpịnye valvụ saddle bras n'akụkụ ọkpọkọ mmiri oyi ọla kọpa ma na-akpụzi spike bras dị nkọ n'akụkụ ọkpọkọ ahụ. Ka oge na-aga, igwe na-asa rọba na-ere ere, agịga ahụ na-emebi emebi, oghere ahụ a kpọpuworo na ọkpọkọ ọla kọpa na-amalite ịgbanye mmiri n'ime okpuru ulo ma ọ bụ kabinet. Koodu ịgba mmiri n'ọtụtụ ikike (gụnyere koodu ụgbọ mmiri mba ụwa na koodu ịgba mmiri Uniform) ugbu a ** machibido valvụ saddle ịpupu onwe ya ***. Na-enwe plumber mgbe niile dochie valvụ saddle na ezigbo ** tee na-enweghị ndu na valvụ bọọlụ mgbako nkeji nkeji, ma dochie tubing fridge na-acha ọcha translucent polyethylene (PEX/poly) na ** eriri igwe anaghị agba nchara na-emepụta ice ** ma ọ bụ tubing ọla kọpa.
• ** Igwe na-asa akwa rọba ojii anaghị agbake agba ***: Igwe eji akwa igwe rọba ojii EPDM na-adịgide n'okpuru nrụgide mmiri 24/7 mgbe niile ma na-akụ ya site na spikes nrụgide mberede ("hama mmiri") oge ọ bụla valvụ eletriki solenoid nke igwe na-emechi. Mgbe afọ 3 ruo 5 gachara, eriri rọba dị n'ime na-agbawa ma na-agbawa ozugbo n'akụkụ olu akwa mkpọ igwe. Dochie hoses rọba ojii mgbe ọ bụla n'afọ ise ọ bụla na ** ihe mkpuchi igwe anaghị agba nchara ** (ụdị ndị etinyere ya na ** auto-shutoff "FloodSafe" ngafe valvụ nlele ** ma ọ bụ jikọta ya na valvụ mmiri na-ekpochapụ mmiri eletrọnịkị akpaka).

Usoro nhazi nhazi nke nzọụkwụ site na nzọụkwụ: ịchekwa kabọd kichin gị na ala ala¶

Imechi mmiri na ịkwatu taịlị ma ọ bụ ala vinyl a na-ahụ anya n'etiti kichin na-ewepụ ihe dị ka pasent 60 nke mmiri site na mgbawa ngwa ngwa. Pasent 40 fọdụrụnụ na-asọpụta ** n'okpuru ebe a na-asa efere gị, friji, na ebe nchekwa ntọala, ebe enwere ikuku ikuku na ebe akụkụ akụkụ akụkụ na plywood subfloors na-amanye mmiri n'elu dị ka sponge, na-ebute ọzịza nhazi n'ime awa na * Aspergillus * / * Stachybotrys * ebu ibu n'ime awa 24 ruo 48. ebu mgbe mmiri mebiri emebi ndu).

flowchart TD
    DrySurface["Kwụpụ 1: Wet-Vac na Squeegee mmiri niile a na-ahụ anya n'ime nkeji 30"] --> PullAppliances["Kwụpụ 2: Wepụ ngwa nju oyi wee wepụ ihe mgbanaka ọla n'okpuru ihe na-asa efere"]
    PullAppliances --> PopToekicks["Kwụpụ 3: Pry Off Base Cabinet Toe-Kick Board iji kpughee oghere zoro ezo n'okpuru ụlọ ọrụ"]
    PopToekicks --> ExtractUnder["Kwụpụ 4: Mmiri tọgbọrọ chakoo n'okpuru ụlọ ọrụ wee lelee elu ụlọ dị n'okpuru"]
    ExtractUnder --> Airflow["Kwụpụ 5: Buru n'uche igbe dị elu/ndị na-akwado Centrifugal n'ime oghere ndị mepere emepe nke mkpịsị ụkwụ."]
    Airflow --> Dehumid["Kwụpụ 6: Gbaa ihe mkpuchi azụmaahịa / nnukwu ihe mkpuchi n'ime ụlọ mechiri emechi ka idobe iru mmiri dị n'okpuru 40%"]
    Dehumid --> MeterCheck["Kwụpụ 7: Nwalee Subfloor na Drywall Site na ntụtụ / Pinless Moisture Meter (<15% Target) Tupu imechi"]

Mee usoro mmịpụta mmiri 5 zoro ezo n'ime awa 2 mbụ¶

• **1. Mepee ma wepụ ihe mgbanaka metal nke dị n'okpuru ọnụ ụzọ efere efere **: Jiri Phillips screwdriver ma ọ bụ 6-millimeter (¼-inch) ọkwọ ụgbọala iji wepụ skru abụọ ma ọ bụ anọ na-ejide eriri igwe dị larịị na ala ala nke efere efere. Na-enwu ọkụ n'okpuru: oghere a na-emeghe ozugbo n'okpuru ebe a na-asa efere na moto na-anọdụ ala n'okpuru ala ma na-ejide lita mmiri na-adịghị mma nke na-agaghị apụ apụ ọ gwụla ma ị na-ewepụ ya ma hapụ ígwè ahụ ka ọ bụrụ onye na-efe efe na-efe efe ozugbo n'okpuru ebe a na-asa efere maka ** 3 ruo 5 ụbọchị **.
• **2. Wepụ mbadamba osisi ma ọ bụ vinyl mkpịsị ụkwụ n'akụkụ ihu ala nke ebe a na-esi nri kichin gị ***: Ụlọ kichin anaghị anọdụ ala n'ala; ha na-anọdụ ala n'elu igbe dị sentimita 9 n'ịdị elu (3.5-inch-high) oghere oghere a na-akpọ ** mkpịsị ụkwụ plinth **. N'ihi na ndị ọrụ ngo na-edina naanị tile ma ọ bụ hardwood * ruo * kabinet kama ịnọ n'okpuru ha, ala dị n'okpuru ụlọ gị na-ejikarị plywood ma ọ bụ kọmpat na-eme ihe dị ka ọdọ mmiri zoro ezo n'oge iju mmiri kichin. Kpachapụ anya wepụ ihe ịchọ mma dị n'ihu mkpịsị ụkwụ mkpụbelata (ma ọ bụ gbanye oghere 5-centimeter / 2-inch ventilashion n'azụ bọọdụ mkpụbelata ka oghere ahụ bụrụ nke a na-adịghị ahụ anya mgbe ị na-agbanye bọọdụ mkpụbelata azụ n'azụ) ka amịpụta mmiri tọrọ atọ na oghere ụlọ ahịa wee fesa ikuku kpọrọ nkụ ozugbo n'okpuru igbe.
• **3. Ejila ọnyà mmiri n'ime laminate, LVP, ma ọ bụ osisi hardwood ***: Ọ bụrụ na ị nwere vinyl plank (LVP), laminate flooring, ma ọ bụ osisi siri ike na kichin, mmiri na-asọfe n'akụkụ ọnụ ma ọ bụ site na plank seams na-abanye n'ime obere oyi akwa n'etiti ihe mgbochi mmiri na-ekpuchi mmiri na ala osisi. Ọbụlagodi na elu nke plank vinyl gị na-enwe nkụda mmụọ mgbe nkeji iri gachara, mmiri nke tọrọ n'okpuru ga-erekarịrị ala ala plywood wee kechie planks n'ime izu abụọ. Wepu ịkpụ akpụkpọ ụkwụ gbara nkeji anọ n'akụkụ mgbidi wee bulie ahịrị mpụta nke plank mkpọchi pịa (ma ọ bụ kpọọ onye na-ahụ maka mweghachi mmiri nke IICRC nwere akwa akwa na-ehicha akwa) ka ikuku wee gbasaa n'okpuru.
• **4. Lelee uko ụlọ okpuru ulo ma ọ bụ ọnụ ụlọ nke dị n'okpuru ebe a na-esi nri ***: Ọ bụrụ na mmiri na-asọpụta n'uko ụlọ dị n'okpuru ala ma ọ bụ na-agbakọta n'ime ihe ọkụ ọkụ n'uko:
  • ** Gbanyụọ sekit maka ọkụ n'elu ụlọ nke ala ozugbo ***.
  • Debe nnukwu ịwụ ma ọ bụ plastik n'ala n'okpuru ihe ọ bụla na-agbapụta "mmiri mmiri" na agba ma ọ bụ drywall nke dị n'okpuru ala, ma jiri nlezianya kpachie obere oghere enyemaka mmiri n'etiti sag ahụ site na iji ọnụ nke screwdriver ma ọ bụ awl ​​si n'akụkụ (ọ dịghị mgbe ọ na-eguzo ozugbo n'okpuru ya). Ịhapụ mmiri ahụ tọrọ n'ime bọket na-egbochi mgbidi akọrọ mmiri nke dị kilogram 30 (paụnd 65) ịpụ na mberede na skru ya ma dakwasị mmadụ n'isi.
• **5. Jikọta ikuku na-agba ọsọ na ikuku ikuku mechiri emechi **: Mepee ọnụ ụzọ ụlọ na drawer niile dị ala, chọọ abụọ ma ọ bụ atọ ndị na-agba ọsọ ọsọ (ma ọ bụ gbazite obere profaịlụ centrifugal "ndị na-ebugharị ikuku" site na ụlọ ahịa ngwaike) gafee ala mmiri na n'ime oghere kabinet mepere emepe, ** mechie windo na ọnụ ụzọ mpụta na ọnụ ụzọ dị jụụ ma dị jụụ karịa ikuku. Igwe ọkụ dị elu ma ọ bụ desiccant ** dehumidifier ** na-aga n'ihu maka awa 72 ruo 96 **, na-ekpochapụ ịwụ nchịkọta ahụ kwa awa ole na ole ruo mgbe mita mmiri na-egosi na ala osisi na ntọala kabinet alaghachila n'ụkpụrụ akọrọ ha (n'okpuru 12 ruo 15% Wood Moisture Equivalent).

Iwu mkpuchi mkpuchi: "Na mberede na mberede" vs "Nlegharị anya ogologo oge"¶

Amụma mkpuchi ndị nwe ụlọ na ndị na-akwụ ụgwọ na-esetịpụ ahịrị iwu dị nkọ n'etiti ụdị mmebi mmiri ngwa abụọ. Otu esi ede ma kọọ akụkọ ihe mere eme n'ime awa 24 mbụ na-eme ka ọdịiche dị n'etiti nkwụghachi ụgwọ zuru oke na akwụkwọ ozi agọnarị iwu:

• ** Ihe a na-ekpuchikarị ("Mgbasa mberede na mberede")**: Ndị nwe ụlọ (dị ka HO-3 na HO-5 na US) na iwu ụlọ / ọdịnaya zuru oke na mkpuchi UK, Canada na Australia ** na-ebute mmiri mebiri ala, igbe igbe, drywall, uko ụlọ, na ihe onwunwe onwe ya ** mgbe igwe na-asa ákwà, valvụ na-adịghị agbawa na mberede. ihe dabara adaba nke na-eme ice na-agbapụ na mberede. (Rịba ama: mkpuchi ọkọlọtọ na-akwụ ụgwọ ịkwatu ma wughachi ala na kabinet nke mmiri mebiri emebi, ** ọ bụghị *** ọnụ ahịa dollar 50 iji rụkwaa ngwa agbajiri n'onwe ya).
• ** Ihe a na-ajụkarị ("Na-aga n'ihu ma ọ bụ Na-aga n'ihu ma ọ bụ Ntupu")**: Amụma mkpuchi ihe fọrọ nke nta ka ọ bụrụ ụwa niile na-ewepu mmebi nke obere mmiri na-agbapụta ngwa ngwa n'azụ efere efere ma ọ bụ friji nke na-akwa ákwá na-achọpụtaghị ruo izu ma ọ bụ ọnwa ole na ole, nke osisi rere ure, isi ntu gbawara agbawa, nchara nchara, ma ọ bụ ihe toro eto.
• ** Chebe nkwupụta gị ***:
  1. **Atụbala sọks gbawara ma ọ bụ valvụ gbajiri agbaji n'ime ahịhịa tupu onye na-ahụ maka inshọransị enyocha ya ***: Tinye eriri gbawara agbawa ma ọ bụ dabara adaba n'ime akpa zip-top akpọrọ na counter. Ọ bụ isi ihe na-egosi anụ ahụ gị na ọdịda ahụ bụ mgbawa na mberede kama ileghara nleghara anya ngwa ngwa.
  2. ** Detuo mbọ mbelata gị ozugbo ***: Amụma mkpuchi ọ bụla nwere iwu iwu "Ọrụ Mgbe Mpụsịrị" nke chọrọ ka onye nwe iwu mee usoro ihe mberede nwere ezi uche iji kwụsị mmiri wee gbochie mmebi ebu / ire ere ọzọ. Chekwaa nnata ụlọ ahịa ngwaike gị maka mgbazinye mmiri-vac na dehumidifier, n'ihi na enwere ike ịkwụghachi ụgwọ mbelata mmiri mberede n'okpuru amụma gị.

Ajụjụ a na-ajụkarị¶

enyochara isi mmalite¶

• Ụlọ ọrụ nyocha, nhicha na ntinye akwụkwọ (IICRC, International): * ANSI/IICRC S500 Standard maka Mweghachi Mmebi Mmiri Ọkachamara (Ụdị Mmiri 1, 2, na 3, Structural Drying Psychrometrics, and Subfloor/Cabinet Cavity Moisture Extraction)*.
• Ụlọ Ọrụ Inshọransị Maka Azụmahịa & Nchekwa Ụlọ (IBHS, United States): Nchọpụta ọdịda akụrụngwa na-eweta mmiri mmiri: Washing Machine Hose Burst Pressures, Ice Maker Saddle Valve Failures, and Automatic Water Shutoff Systems.
• U.S. Environmental Protection Agency (EPA, United States): Ntụziaka dị nkenke maka ebu, mmiri, na ebe obibi gị (Ohere ịkpọ nkụ nke 24 ruo 48 iji gbochie ime ime ụlọ mgbe mmiri gbasasịrị).
• National Fire Protection Association na Electrical Safety Foundation International (NFPA / ESFI, United States): * Nchekwa eletrik n'oge ntinye mmiri ime ụlọ na iju mmiri ngwa ngwa *.
• Òtù Mba Nile nke Ndị Ọrụ Plumbing na Mechanical (IAPMO, International): * Usoro Plumbing Uniform (UPC) chọrọ maka oghere ikuku ikuku, Ntugharị dị elu, Nkwụsị Nkwụsị Nrụnye, na Mmachibido nke Ịkpọpu Saddle Valves.
• Njikọ nke British Insurers na Chartered Institute of Plumbing and Heating Engineering (ABI / CIPHE, United Kingdom): Nnapụ Mgbochi Mmiri na Ntuzi Mwepu Mberede maka igwe na-asa ákwà na ụlọ na ndị na-asa efere.

Ntuziaka emetụtara¶

• ọkpọkọ gbawara
• Iju mmiri okpuru ala
• Ebu mgbe mmiri mebiri
• Igwe ọkụ eletrik