Plafonds jibɔlenw minnu bɛ sɔgɔsɔgɔ ani Drywall walima Plaster (Plaster) minnu bɛ ka bin sɔɔni¶

Plafond min bɛ sɔgɔsɔgɔ, min bɛ kurukuru, walima min bɛ jigin, o tɛ ji nɔgɔlen dɔrɔn ye; o ye doni ye min bɛ baara kɛ sanfɛ, min sirilen bɛ i ka sigiyɔrɔ sanfɛ yɛrɛ, min bɛ se ka tigɛ ka bɔ a jiribolodalenw na k’a sɔrɔ i ma lasɔmi. A kɛra sababu ye sanfɛla baarakɛminɛn dɔ falenni fɛ, pipe dɔ pɛrɛnna min bɛ so sanfɛ, fiɲɛbɔlan min ma ɲɛ, walima sanjiba ji min bɛ woyo ka tɛmɛ so sanfɛ, ji min bɛ ɲɔgɔn lajɛ so sanfɛla la, o bɛ teliya ka jipsi pankurun nɔgɔman walima lime plastiki kɛ girinya ye min bɛ se ka bin. Ji min sirilen don litiri kelen na, o girinya ye kilo 1 ye (Amerika galɔn 1 girinya ye kilo 8,34 ye), ani sanfɛla kelen min janya ye mɛtɛrɛ 3 ni mɛtɛrɛ 3 ye, n’a falen bɛ ji la min janya ye santimɛtɛrɛ 2,5 ye ani ni insulasi min ɲiginnen don, o bɛ kilo 225 ni kɔ minɛ, min bɛ minɛ ni kogo jalen dɔrɔn ye kurukuruw walima jiri lath keys brittle.

Fɛn min bɛ kɛ sababu ye ka so sanfɛlan min falen don ji la, o ye janfa ye min ɲɔgɔn tɛ, o ye masinw tiɲɛni barikama ye, kuran fiyɛli ɲɛnama dogolenw, ani fɛn baga dogolenw bɛ ɲɔgɔn sɔrɔ boon kɔrɔw kɔnɔ. Dutigiw bɛ fili tuma bɛɛ k’u jɔ latex penti kurukurunin dɔ jukɔrɔ min bɛ wuli ka bɔ a nɔ na walasa k’a sɔgɔ ni balabala bololanɛgɛ ye, o la, ji litiri 50 (galɔn 13) ni jipsi pankurun ɲiginnen kilogaramu 30 bɛ bin u kun na k’a sɔrɔ u bɛ fanga di jidagayɔrɔ ma yeelenbɔlan dɔ kɔnɔ min falen bɛ ji la. Ka wale kolomaw kɛ miniti saba fɔlɔ kɔnɔ, ka bɛɛ bɔ jiginyɔrɔ jukɔrɔ, ka fanga faga ka taa sanfɛ-sɛrɛkiliw la minnu bɛ pankurun tigɛyɔrɔba la, ka jibɔyɔrɔ datugu, ani ka lancing drain diagonal kɛ dɔrɔn ni pankurun yɛrɛ tora ka ɲɛ, o bɛ kunkolo jogin ni kuran gosili bali.

Aw bɛ o kɛ sisan¶

1. Aw bɛ mɔgɔw ni sokɔnɔbaganw bɛɛ bɔ so kɔnɔ joona. Aw bɛ bɛɛ labɔ ka bɔ so sanfɛla la min bɛ sɔgɔsɔgɔ. Aw kana sunɔgɔ abada, ka sigi, walima ka taama sanfɛlan jukɔrɔ min bɛ kɔnɔbara jigincogo jira, a sɔgɔsɔgɔninjɛ bɛ kari, walima nɛgɛ kunw bɛ ka wuli, barisa jisumalan falen ni plastiki kɔrɔw bɛ tiɲɛ o yɔrɔnin bɛɛ la k’a sɔrɔ aw ma lasɔmi.
2. Aw bɛ kuran faga ka taa sanfɛla la ani kafoda kɛrɛfɛyɔrɔw la, karilanba la. Aw kana kogo yeelenbɔlan ɲiginnen dɔ wuli so kɔnɔ. Aw bɛ taama ka taa aw ka kuran baarakɛyɔrɔba la ani ka OFF fɛnw tigɛ minnu bɛ sanfɛla lanpanw, sanfɛlanw, ani kuran bɔyɔrɔw kɔlɔsi so min bananen don ani duguma a sanfɛ yɛrɛ. Ni breaker labels ma jɛya, aw bɛ Main Service Disconnect breaker wuli ka taa OFF la.
3. Aw bɛ ji sɔrɔyɔrɔ min bɛ baara la, aw bɛ o jɔ ni a bɔra so kɔnɔ pɔmpi walima HVAC minɛnw na. Aw bɛ sanfɛla sanuyasow, finiko masinw, radiyatɛriw, ani sankanso jisumalanw walima fiɲɛbɔlanw lajɛ. Aw bɛ fiɲɛbɔlan da tugu walima ka du ji dabɔlan kunba faga ka tugu an kɔ burst pipe kɔrɔtɔko ɲɛminɛbaga. Ni aw b’a fɛ ka fɔɲɔba wulilenw sɔrɔ, aw bɛ segin an ka so sanfɛla bɔgɔlanw kunbɛncogo gafe so min bɛ duguma, o lakanani kɔfɛ.
4. Aw bɛ danfara don latex penti blister flexible ni structural board rigid sag cɛ ka bɔ da la. Aw bɛ lanpan yeelen ka tɛmɛn sanfɛla kan ni kɛrɛ ye min man dun ka bɔ da la. Ji foroko nɔgɔlen min bɛ i n’a fɔ balon, n’a sirilen bɛ latex penti acrylique flexible kɔfɛ, o bɛ se ka bɔ kɛnɛma ka bɔ kɛrɛ fɛ ka don daga kɔnɔ, k’a sɔrɔ ni jiribolo janyalenba bɛ jigin ka tɛmɛn kogo jalen gɛlɛnw kan, papiye kasɛti jɛlenw kan, walima platiri ni lath karilenw, o kɔrɔ ye ko pankurun girinman ye a yɛrɛ sama ka bɔ jirisunw na, wa a bɛ ɲini ka bin.
5. Aw bɛ jibɔyɔrɔ dɔ dabɔ min bɛ ji bɔ ka bɔ da la. Ni sanfɛla bɛ jigin dɔrɔn walima ni penisilini kuru fitini dɔ bɛ a minɛ, aw bɛ jibɔlanw walima plastiki finimuguw sɔgɔ duguma ka tɛmɛ jibɔyɔrɔ jukɔrɔ ni barajuru bolo ye ka bɔ kɛrɛ fɛ, ka sɔrɔ ka daga litiri 19 (galɔn 5) bila jibɔlan jukɔrɔ. Aw bɛ finimugu kɔrɔ dɔ siri daga da la walasa ji min bɛ bin ka jigin fini na ni dususuma ye sanni a ka mɛtɛrɛ 2 (sen 6,5) sɔgɔ kɛrɛ fɛ.
6. Aw bɛ so si hakɛ ni ji sɔrɔyɔrɔ lajɛ sani aw ka so sanfɛla si sɔgɔ. So minnu jɔra walima minnu dilannen don ka kɔn 1990 ɲɛ (kɛrɛnkɛrɛnnenya la "popcorn" walima stipple acoustic ceilings) olu bɛ se ka kɛ asibiti fiyɛw walima penti plɔmu ye minnu ka kan ka kɛ ni jisuma ye ani P100 ninakili lakanani. Ni ji kasa ka ɲi walima ni a bɔra sanfɛ ɲɛgɛn na walima jibolisira kɔkanna na, aw bɛ a minɛ i n’a fɔ ji jɛman suguya 2 walima ji nɔgɔ suguya 3 ani ka ɲɛ tangalan don, nitirili ganw, ani ninakililan.

--- .

Plafond binni faratiw jateminɛni ani kɔrɔtɔko latigɛ jiri¶

Aw bɛ baara kɛ ni nin ɛntɛrinɛti ni lakana jatebɔsɛbɛn ye min bɛ bɔ so min bananen don, o da la walasa k’a dɔn ni a man ɲi ka so sanfɛlan jibɔrɛ dɔ lase ani ka a ji bɔ a la walima ni aw ka kan ka so kɔnɔ ka bɔ so kɔnɔ ka so jɔcogo walima a labɛncogo ɲɛnabɔbagaw makɔnɔ.

flowchart TD
    Start["Ji bɛ jigin, ka bɔgɔbɔgɔ, walima ka a biri plafond kɔnɔ sanfɛ"] --> ClearRoom["1. Aw bɛ Mɔgɔw ni sokɔnɔbaganw bɔ sanfɛla jukɔrɔ joona"]
    ClearRoom --> KillPower["2. Aw bɛ sanfɛla yeelen ni so tigɛlanw datugu kuran panɛli kunba la"]
    KillPower --> StopWater["3. Aw bɛ jibonba da tugu (Plumbing Leak) walima aw bɛ So sanfɛla/HVAC sɔrɔyɔrɔ ɲini"]
    StopWater --> InspectType{"4. Shine Flashlight from Doorway:<br/>I bɛ deformation suguya jumɛn ye?"}

    InspectType -->|"A. Latex penti bulon nɔgɔlen, min bɛ sigida la<br/>Drywall seams flat and tight"| CheckHazards{"5. Yala ji saniyalen don (Kategori 1)<br/>ani san 1990 kɔfɛ plafond tɛ popcorn ye wa?"}
    InspectType -->|"B. Jiginni janya >1,5 cm (5/8 in),<br/>sɔgɔsɔgɔninjɛ tilennenw karilen, walima plaster lath bulge"| ImminentCollapse["IMminent Structural Collapse:<br/>Aw kana taama plafond jukɔrɔ walima ka poke ka bɔ duguma"]
    InspectType -->|"C. Ji min bɛ bɔn yeelenbɔlan fɛ,<br/>sanfɛla fiɲɛbɔlan fɛ, walima sisi alarma fɛ"| ElectricalFlood["Farati min bɛ fixture énergétique la:<br/>Sɛgɛsɛgɛli kɛ Main Breaker OFF kan; a to ji ka don daga kɔnɔ;<br/>aw kana kuran don ɲɔgɔn na kokura fo kurantigi ka sɛgɛsɛgɛli kɛ"]

    CheckHazards -->|"Ɔwɔ: Aw bɛ ji sanuman ni bi jalenw kɛ"| SafeLance["Controlled Diagonal Lancing :<br/>Aw bɛ jɔ kɛrɛ fɛ duguma sabatilen kan;<br/>aw bɛ blister da sɔgɔ ni awl ye min bɛ sigi bere kan<br/>ka don 19L (5-gal) bucket kɔnɔ min bɛ ni towel ye"]
    CheckHazards -->|"Ayi: Nɔgɔ/kɔlɔsilikɛlan kɔkanna WALIMA<br/>ka kɔn san 1990 ɲɛ popcorn/plaster texture"| HazmatDrain["Biohazard / Asbestos Protocol :<br/>Aw bɛ P100 ninakiliminɛn, ɲɛkisɛw, ani ganw don;<br/>aw bɛ jisuma kɛ plastiki fanibugu kɔnɔ;<br/>aw bɛ bɔrɔ ɲiginnenw kɛ plastiki datugulen na mililitiri 6 kɔnɔ"]

    ImminentCollapse --> ShoreOrDrop["Aw bɛ so datugu:<br/>Aw bɛ fɛn nafamaw lamaga dɔrɔn ka bɔ lamini lakananen na ni bere ye;<br/>aw bɛ baarakɛla bila ka pull-down<br/>walima T-brace shoring kɛ ni ji bɔli jɔra"]
    SafeLance --> DryOut["6. Aw bɛ Insulasi jilama bɔ ani ka dehumidifiers boli Lɛrɛ 24 fo 48 kɔnɔ walasa ka nɔgɔ bali"]
    HazmatDrain --> DryOut
    ElectricalFlood --> DryOut

--- .

Structural mechanics: mun na plafond ɲiginnenw bɛ bin ani u girinya hakɛ¶

Walasa ka jateminɛ kɛ ko sanfɛla bɛ surunya bin na cogo min na, i ka kan ka sigida sanfɛlanw jɔcogo faamuya ani ji bɛ u sirili fanga masin na cogo min na miniti damadɔ kɔnɔ fo lɛri damadɔ kɔnɔ.

1. Gypsum drywall ceilings (So minnu jɔra kabini san 1950 fo ka na se bi ma) .¶

Bi sanfɛlanw bɛ kɛ ni milimɛtɛrɛ 12,7 (½-inch) walima 15,9-milimɛtɛrɛ (⅝-inch) panɛriw ye minnu dilalen don ni jipse kogobɔlan (drywall walima plasterboard) ye minnu sirilen don walima minnu sirilen don ɲɔgɔn na jiri sanfɛlanw kan walima so sanfɛlanw kan minnu ni ɲɔgɔn cɛ ye santimɛtɛrɛ 40 walima 60 ye (santimɛtɛrɛ 16 walima 24) cɛmancɛ la:

• Girinya jalen ni girinya falen: Jalen min janya ye mɛtɛrɛ 1,2 ni 2,4 ye, milimɛtɛrɛ 12,7 (½-inch) jalen, o girinya bɛ se kilogaramu 22 fo 25 ma (kilo 48 fo 55)**. Kɔnɔna na ye kalisiyɔmu sulfate kristali degunlen ye min sirilen bɛ papiye girinmanw ɲɛda la. Ni ji bɛ ɲɔgɔn lajɛ san fɛ, kapilɛri wale bɛ ji sama ka don jisuma kɔnɔ ani ka papiye ɲɛda nɔgɔya.
• Fastener pull-through failure: Drywall sheet fanga kɛmɛsarada la 80 ɲɔgɔn bɛ bɔ a ɲɛfɛla ni kɔfɛla bololabaara papiye ɲɛda la minnu ma tiɲɛ minnu sirilen bɛ joists la ni drywall screws walima nails ye. Ni ji ye amidon kola wuli dɔrɔn ka jipisi kɔnɔna wuli ka milimɛtɛrɛ 8 (5/16-inch) kurukuru misɛnninw lamini ka kɛ nɔgɔ nɔgɔlen ye, sɛbɛn ɲiginnen bɛ ** sama dɔrɔn ka tɛmɛ kurukuru jɔlenw kan** ka sɔrɔ juruw tora josiw kɔnɔ.
• Insulasi jilama cayalan: Plafond dingɛ fanba bɛ sɔrɔ fibreglasi batts walima kunnafonisɛbɛn selilulozi insulation recyclé fiyɛlen kɔnɔ. Selulɔzi ɲiginnen bɛ kɛ i n’a fɔ ɛponji belebeleba min bɛ a girinya jalen siɲɛ 3 fo 5 minɛ ji la, ka ** kilogaramu 15 fo 35 fara a kan mɛtɛrɛ kɛrɛnkɛrɛnnen kelen na (kilo 3 fo 7 mɛtɛrɛ kɛrɛnkɛrɛnnen kelen na)** ka girinya salen digidigi ka jigin kogo jalen nɔgɔlen kan.
• Latex penti balon nɔ: Bi kɔnɔna sanfɛlanw pentalen don ni latex penti akiriliki kɛmɛsarada la 100 caman ye, o min bɛ kɛnɛya ka kɛ filimu elastomɛri ye min bɛ se ka wuli. Ni ji bɛ don pinɛ dingɛ dɔ fɛ min bɛ kogo jalen sanfɛ, a ka ca a la a bɛ siri kogo jalen papiye ni latex penti fari cɛ, ka sugunɛ dulon dɔ fiyɛ min bɛ se ka santimɛtɛrɛ 15 fo 45 (santimɛtɛrɛ 6 fo 18) kɛ duguma ani ka ji litiri 10 fo 40 minɛ sani a ka pɛrɛn.

2. Tariku jiri lath ani lime/gypse plaster plafond (So minnu jɔra ka kɔn san 1950 ɲɛ) .¶

So kɔrɔw ni tariku sobaw bɛ ni sanfɛlanw ye minnu dilannen don ni plaster ɲiginnenw ye minnu ka bon kosɛbɛ (scratch coat, brown coat, ani finish coat, u bɛɛ lajɛlen janya ye milimɛtɛrɛ 19 fo 25 ye walima ¾ fo 1 inch) minnu sirilen bɛ jiribolo misɛnninw kan (jiri lath) minnu sirilen don jirisunw kan ni milimɛtɛrɛ 6 fo 9 ye (¼- fo ⅜-inch) yɔrɔw:

• "Plaster keys" bɛ plafond minɛ sanfɛ cogo min: Ni plastererw ye bɔgɔmugu ɲiginnen gɛrɛ sanfɛ ka tɛmɛn jirisunw lath strips ni ɲɔgɔn cɛ yɔrɔw fɛ, bɔgɔ tɛmɛnen bɛ kuru ka kɛ bɔgɔdaga sanfɛ ka gɛlɛya ka kɛ ankɔriw ye minnu bɛ i n’a fɔ jɛgɛ, n’u bɛ wele ko plaster keys (walima nibs). O bɔgɔdaga kurulenw ye dɔrɔn masinfɛn ye min bɛ plasitiri girinman dɔ minɛ ka kɔrɔta ka kɛɲɛ ni girinya ye.
• Mun na pilatiri binni bɛ mɔgɔ faga kosɛbɛ ka tɛmɛ kogo jalen kan: A tɛ i n’a fɔ kogo jalen min janya ye kilo 8 fo 11 ye mɛtɛrɛ kɛrɛnkɛrɛnnen kelen na (kilo 1,6 fo 2,2 mɛtɛrɛ kɛrɛnkɛrɛnnen kelen na), platiri min bɛ kɛ ni fɛn saba ye, o girinya bɛ se kilo 35 fo 50 ma mɛtɛrɛ kɛrɛnkɛrɛnnen kelen na (kilo 7 fo 10 mɛtɛrɛ kɛrɛnkɛrɛnnen kelen na) hali sani a ka ji minɛ, o bɛ bɛn a sirili ma bɛton siraw dabɔlanw sanfɛ.
• Lath-and-plaster failure mechanism: Ni bɔgɔdaga dɔ ye jiri-lath-plaster dɔ fa, jiri lath-strips jalenw bɛ ji minɛ ka funu kosɛbɛ, ka plaster keys sirilenw kɔ kari ka bɔ lath kɔfɛ. Ni o tɛ, nɛgɛ tigɛlen nɛgɛberew minnu nɔgɔlen don, olu bɛ a to jiri lath matarafa ka bɔ jirisunw na. Ikomi tariku pilatiri bɛ barika bonya ni baganw kunsigi walima sisal fibre ye, a man teli ka bin fɛn misɛnninw na; o nɔ na, ​​mɛtɛrɛ 2 ni 3 (sen 6 ni mɛtɛrɛ 10) bɔgɔlan min bɛ to senna, n’a girinya bɛ kilo 180 fo 300 (kilo 400 fo 650) bɔ, o bɛ tigɛ ka bin duguma seginkanni tilayɔrɔba kɔnɔ.

--- .

Matirisi min bɛ tali kɛ ɲɔgɔn na : penti kurukuru min tɛ kojugu kɛ ni plafond structurel bɔgɔbɔgɔli ye min bɛ se ka kɛ¶

Sani aw ka sen don so kɔnɔ walasa ka daga dɔ bila walima ka jibɔrɛ dɔ bɔ, aw bɛ aw jɔ da la min bɛ se ka kɛ, ka taamasiɲɛ yetaw ni mankan minnu bɛ sanfɛ, olu suma ni nin sɛgɛsɛgɛli tabali in ye.

--- .

Protokol step-by-step : cogo min na aw bɛ se ka so sanfɛlan jibɔyɔrɔ lance ani ka a ji bɔ cogo min na lafiya la¶

Ni ji bɛ ɲɔgɔn sɔrɔ sanfɛla latex penti blister kɔnɔ walima kogo jalen yɔrɔ dɔ sanfɛ min ma sama fɔlɔ a ka juruw kan, ka o ji to so sanfɛ, o bɛ a to ji ka jɛnsɛn kɛnɛma sanga 2 fo lɛri 6 nataw kɔnɔ ani ka sɛbɛnfura bɛɛ jigin. Ni aw ye jibɔyɔrɔ fitinin dɔ dabɔ bɔrɔ duguma yɔrɔ la, o b’a to girinya ka ji lankolonya k’a kɛ daga kɔnɔ k’a sɔrɔ kojugu tɛ a la.

Taabolo fɔlɔ : Aw bɛ kuran fanga bɔli ni ji suguya sɛgɛsɛgɛ¶

1. Aw bɛ a sɛgɛsɛgɛ karikɛsu belebele kɔnɔ ko so sanfɛla lanpanw, a bɔyɔrɔw, ani dugumalan karilanw bɛ OFF.
2. Aw bɛ lakanani ɲɛkisɛw don, baarakɛminɛnw, nitirili ganw, fiɲɛ gɛlɛn walima nɛgɛso kasɛti, ani N95 walima P100 ninakililan (wajibiya ni so jɔra ka kɔn san 1990 ɲɛ walima ni ji bɛ bɔ sanuyaso walima dumunikɛyɔrɔ jibɔyɔrɔ la).

2nan : Aw bɛ bucket caman splash-control system sigi sen kan¶

A ka ca a la, so sanfɛlan bɛ ji min ka ca ni litiri 19 (galɔn 5) daga kelen ye, wa ni aw ye kurukuru in sɔgɔ, aw tɛ se ka dingɛ datugu ka segin san fɛ ka aw to daga lankolon.

1. Aw bɛ plastiki bɔgɔlan min ji tɛ don a la walima poliyetilɛni milili 6 bɔgɔlan dɔ kɛ duguma kurukuru jukɔrɔ, ka a janya mɛtɛrɛ 2 (sen 6,5) fan bɛɛ fɛ.
2. Aw bɛ litiri 19 (galɔn 5) daga lankolon fila walima saba walima plastiki toti bila ɲɔgɔn kɛrɛfɛ bɔrɔ da la.
3. Aw bɛ minɛn fɔlɔ bulon sɔgɔ ka ɲɛsin kurukuru jiginyɔrɔ dɔgɔmannin jukɔrɔ ka bɔ kɛrɛ fɛ ni balabala bolo ye.
4. Aw bɛ jisumalan kɔrɔ dɔ siri minɛni daga kɛrɛfɛ walasa a ka jɛngɛ fo a kɔnɔna duguma, walima aw bɛ finimugu kurulenw kɛ santimɛtɛrɛ 5 (santimɛtɛrɛ 2) kɛ duguma. Ni sanfɛlaji binna mɛtɛrɛ 2,4 (sen 8) kɔnɔ ka don daga lankolon dɔ kɔnɔ, a bɛ ji nɔgɔlen bɔn so kɔnɔ; ka jigin finimugu ɲiginnen kan, o bɛ fanga minɛ ani ka jibolisira to a kana kɛ ni ji ye.

Taabolo 3nan : Aw bɛ jiribolo sɔgɔli kɛ degere 45 la (Dingɛ fitinin fɔlɔ) .¶

Aw kana sanfɛla kuru tigɛ abada ni nafama muru ye: ni aw ye latex penti sɔgɔlen tigɛ, min falen bɛ ji la, o bɛ kɛ sababu ye ka foroko tigɛ ka da i n’a fɔ jibɔlan min bɛ pɛrɛn, ka ji litiri 30 (galɔn 8) fili segin kelen kɔnɔ.

1. Aw bɛ milimɛtɛrɛ 3 (⅛-inch) nɛgɛ, sɔgɔsɔgɔninjɛ, walima Phillips kurukuru fitinin siri ka se mɛtɛrɛ 1,5 fo 2,4 ma (sen 5 fo 8) jiri barajuru bololanɛgɛ walima pentikɛla ka bere laban na ni duct tape ye.
2. Aw bɛ aw jɔ ka ɲɛ duguma jalen kan mɛtɛrɛ 1,5 fo 2 (sen 5 fo 6,5) ka taa kurukuruni kɛrɛ fɛ, ka sira min bali ka taa da la aw kɔfɛ.
3. Aw bɛ aw bolo se sanfɛ ni aw ka bere ye ka pinɛfɛn fitinin kelen dɔ sɔgɔ latex penti kurukuru dulonnen duguma dakun yɛrɛ la:
4. Dingɛ min janya ye milimɛtɛrɛ 3 ye, o bɛ jikuru jɔlen dɔ dilan min bonya bɛ se kretiɛn ma, min ɲɛsinnen bɛ ka jigin ka taa i ka daga cɛmancɛ la k’a sɔrɔ a ma lamini penti walima kogo jalen tigɛ.
5. Ni daga fɔlɔ bɛ fa fo ka se a hakɛ tila sabanan fila ma (litiri 12 / galɔn 3), aw bɛ aw ka balawu bolo kɛ ka daga dafalen sɔgɔ kɛrɛfɛ ka aw to aw ka daga lankolon filanan sɔgɔ baji jukɔrɔ.
6. Ni ji bɛ ka ɲɔgɔn dalajɛ jalen fla sanfɛ (pentiri kuru tɛ a la): Aw bɛ nɔgɔ ɲiginnen yɔrɔ min ka dɔgɔn, aw bɛ o yɔrɔ ɲini (aw bɛ aw yɛrɛ tanga layini si ma min bɛ boli yeelenbɔlan fila ni ɲɔgɔn cɛ, kuran kabɔri sirilen bɛ yɔrɔ minnu na). Aw bɛ baara kɛ ni aw ka bɔgɔdaga ye min bɛ sigi bere kan ka bɔ degere 45 la, aw bɛ a digi ka tɛmɛ kogo jalen ɲiginnen kɔnɔ min bɛ jisuma yɔrɔ la min ka dɔgɔn kosɛbɛ walasa ka kasi dingɛ dɔ dilan min janya ye milimɛtɛrɛ 6 ye walasa ji ka don aw ka daga kɔnɔ sanni a ka jɛnsɛn ka taa a fɛ.

--- .

Kuranminɛn minnu falen don san fɛ, olu ɲɛnabɔli: bidon minnu bɛ don a kɔnɔ, sanfɛla fiɲɛbɔlanw, ani sisi alarmaw¶

Ji min bɛ sira ta min tɛ se ka wuli ka tɛmɛ duguma walima so sanfɛ jirisunw fɛ, a bɛ se ka fɔ ko tuma bɛɛ, o bɛ dingɛw sɔrɔ minnu tigɛlen don sanfɛla la kuran kɛsu kama.

1. Ji min bɛ bɔn ka tɛmɛ "can" yeelenw fɛ, lanpanw walima LED fɛnw fɛ minnu bɛ don a kɔnɔ¶

• Mun na ji bɛ yeelenbɔlanw laɲini: Kurantigiw bɛ dingɛw sɔgɔ santimɛtɛrɛ 10 fo 15 (santimɛtɛrɛ 4 fo 6) ka tɛmɛn sanfɛla jalen fɛ walasa ka ɲɔgɔndan kɛsu ni bidonw bila. Ji min bɛ boli ka tɛmɛn jalen sanfɛ, o bɛ woyo o nɛgɛso kɔnɔ ka jigin sosɛti walima jirisunba bololanɛgɛ fɛ.
• Teliya walew:
• Aw bɛ a lajɛ ni yeelenbɔlan ye OFF ye kuran panneau belebele la ani ka kaseti bila bɔgɔlan wulilan kan walasa mɔgɔ si kana a wuli ka segin a kan.
• Aw kana anpulu ɲiginnen dɔ bɔ abada ka aw jɔ duguma yɔrɔ ɲiginnen kan, hali ni kogo sɛgɛsɛgɛlikɛlan fagara (so minnu sirilen don ni switch loop ye, olu bɛ 120V/230V nɛgɛ funteniman dɔ ta min bɛ to ka ɲɛnamaya sanfɛla lanpan kɛsu kɔnɔ hali ni kogo sɛgɛsɛgɛlikɛlan bɛ OFF la).
• Ni karikɛlanba bɛ OFF la ani ni ji bɔli jɔra, aw bɛ jirisunba min bɛ minɛ ni ressort ye, aw bɛ o sama ka jigin walima ka gilasi globo dome (min ka teli ka fa ji litiri 2 fo 4 la) ka a kurukuru ka a sɔrɔ aw bɛ ɲɛ tangalan don ani ka jɔ kɛrɛ fɛ fibreglasi lada kan, ka globo lankolonya ka don daga kɔnɔ.
• Aw bɛ a to a da wulilen don walasa a ka ja fiɲɛ fɛ fo lɛri 48 fo lɛri 72, ani ka kuran baarakɛla dɔ bila ka nɛgɛberew ni sosɛtiw lajɛ ni u ma sɔgɔ sani aw ka kuran segin a ma.

2. So sanfɛla sisi ni gazi monoksidi alarma minnu sirilen don ni nɛgɛ gɛlɛnw ye, olu bɛ pɛrɛn jibɔ waati¶

• Ni ji bɛ jigin sisibɔlan kɔnɔ min sirilen don ni nɛgɛ gɛlɛn ye, ji bɛ ɲɛkisɛlabɔlan bridge ani ka ɲɔgɔndan nɛgɛ surunya, ka so bɛɛ ka nkalon alarma lawuli sugolan bɛɛ kan siɲɛ kelen.
• Ji-shorted hardwired alarm (ji-shorted hardwired alarm) da tugu cogo min na lafiya la:
• Aw bɛ OFF ciriw tigɛlan min bɛ sisi alarma ciriw balo aw ka panneau principal la.
• Aw bɛ jɔ jibɔlan kɛrɛ fɛ fibreglasi sennasanbara jalen kan (aw kana aliminiyɔmu abada), aw bɛ detektɛri farikolo tigɛli waati kɛrɛ fɛ siɲɛ naani walasa k’a bɔ a jiginni bololanɛgɛ la, ani ka aw ka plastiki 3-prong wiring harness bɔ kɔfɛ.
• Aw bɛ jibɔlan ta ka taa yɔrɔ jalen na, ka 9-volt backup batiri bɔ (walima ka batiri banbali sɛgɛsɛgɛlikɛlan wuli a kɔfɛ), ka sɔrɔ ka a bila a nɔ na; sisi ni CO alarma minnu bɛ ji la, olu ka kan ka wuli tuma bɛɛ, u man kan ka ja abada ka baara kɛ ni u ye kokura, bawo fɛnɲɛnamafagalan tolenw bɛ sensɛri pankurun tiɲɛ.

3. So sanfɛla fiɲɛbɔlan girinman minnu bɛ bila sanfɛlan yɔrɔw la minnu ɲiginnen don¶

• Sigida lamini ventilateur standard bɛ kilogaramu kilo 7 fo 23 (kilo 15 fo 50). Hali ni sow jɔcogo sariyaw b’a ɲini ka so sanfɛla fiɲɛbɔlanw siri nɛgɛdaga dɔ la min sirilen bɛ nɛgɛdaga la, n’a sirilen bɛ jiriw la, fiɲɛbɔlan kɔrɔ caman walima minnu tun sigilen bɛ diɲɛlatigɛla fɛ, olu tun bɛ siri cogo bɛnbali la plastiki kɛsu kan walima u tun bɛ siri ni bololanɛgɛ ye ka ɲɛsin kogo jalen ma.
• Ni sanfɛla fiɲɛbɔlan lamini kogo jalen ɲiginnen don walima ni a bɛ sɔgɔsɔgɔ, aw bɛ fiɲɛbɔlan minɛ i n’a fɔ a bɛ se ka bin joona ani ka bɛɛ to so kɔnɔ fo baarakɛla dɔ ka karamɔgɔya fɛnɲɛnamafagalan sɛgɛsɛgɛ.

--- .

Farati kɛrɛnkɛrɛnnen minnu bɛ so kɔrɔw kɔnɔ: asibiti popcorn plafond, plɔmu penti, ani ji nɛrɛma¶

Sani aw ka kogo jalen tiɲɛnen ci walima ka so sanfɛlan kulu min binna, aw bɛ aw jɔ dɔɔnin ka kɛnɛyako farati fila jateminɛ minnu tɛ ye: minɛnw/nɛgɛw bagaw minnu bɛ so sanfɛlan na, ani banakisɛfagalan minnu bɛ bɔ fɛnɲɛnamaw la ji sɔrɔyɔrɔ la.

1. San 1990 "popcorn" plafonds, joint compound, ani tariku plaster¶

1945 ni san 1980 labanw cɛ, ni fiyɛli ye ni acoustic ceiling texture ("popcorn" walima "stipple" ceiling), drywall joint compound, ani insulating plasters dɔw tun bɛ dilan tuma bɛɛ ni kɛmɛsarada la 1 fo 10 ye krysotile white asbestos fibres ye. So minnu ka so sanfɛlan bɛ insulasi ka kɔn san 1990 ɲɛ, olu fana bɛ se ka kɛ ni loose-fill silver-gold vermiculite pebble insulation (Zonolite) ye minnu sigilen bɛ jalen sanfɛ, o bɛ se ka kɛ anfibole tremolite asbestos ye.

• Mun na jiginɛ jilama ka fisa ni cɛncɛn jalen ye, ni a minɛna ka ɲɛ: Ni popɔrɔsi binna sanfɛla nɔgɔw tora ji la kosɛbɛ, asibiti fiyɛw bɛ to ka siri bɔgɔ la sanni u ka pan fiɲɛ na. O fili jugu bɛ kɛ ni dutigi ye so sanfɛla nɔgɔ binnalenw bila ka ja ta tapi walima duguma ka u ko ni balabala ye walima k’u sama ni du kɔnɔ fɛnɲɛnamafagalan ye walima ni butiki kɔnɔ fɛnɲɛnamafagalan ye, ka asibiti fiyɛri miliyɔn caman kɛ aerosol ye so kɔnɔna bɛɛ la.
• Jigin maracogo lakananen sariyaw ka ɲɛsin sanfɛlan binni ma sani san 1990 ka se (aw ye an ka... asibiti, plɔmu buguri, ani radɔn sɛgɛsɛgɛli ɲɛminɛbaga): .
• Aw bɛ aw ka santiri sofa walima fiɲɛdilan (HVAC) fiɲɛbɔlan OFF teliya la ani ka plastiki siri segin ni jibɔyɔrɔw kan so kɔnɔ.
• Aw bɛ nɔgɔ binnalenw to aw ka to ka jigin ni aw ye u sisi ni ji ye min ɲagaminen don ni minɛn safinɛ jilama dɔɔni ye min bɛ bɔ fiyɛli buteli kɔnɔ.
• Aw bɛ ɲɛda tilancɛ fiɲɛbɔlan don ni magenta P100 (walima EN P3) filɛriw ye, datugulanw minnu bɛ kɛ siɲɛ kelen, butiki datugulanw, ani nitirili ganw.
• Aw bɛ fɛn ɲiginnenw kɛ ka u kɛ 6-mil (0,15-millimeter) poliyetilɛni bɔrɔ girinmanw kɔnɔ ni u ɲiginnen don, aw bɛ duguma gɛlɛnw ko ni finimugu ɲiginnenw ye minnu bɛ kɛ siɲɛ kelen (tɛmɛsira kelen foli kelen kɔnɔ), ani aw kana du kɔnɔ aspiratɛri kɛ abada.
• Aw bɛ santimɛtɛrɛ 2 (insi 1) ta sanfɛlan sɔgɔlen na bɔrɔ fila kɔnɔ minnu bɛ zipu sanfɛ, ka taa n’a ye Polarized Light Microscopy (PLM) asibiti laboratuwari la min lakodɔnnen don walasa ka a lajɛ ni a ka kan ka dɔgɔya ni lase ye.

2. Ji nɔgɔli suguyaw (IICRC S500 ji tiɲɛni sariya) .¶

Ji seginni fɛɛrɛtigiw bɛ sanfɛla bɔgɔbɔli tila ka kɛ biyohazard suguya saba ye ANSI/IICRC S500 Standard kɔnɔ:

--- .

Fɛn min ka kan ka kɛ o yɔrɔnin bɛɛ la, plafond dɔ binna kɔfɛ¶

Ni aw ka so sanfɛla yɔrɔ dɔ binna duguma sani aw ka se ka ji bɔ a la, aw bɛ nin sabatili sɛgɛsɛgɛli sɛbɛn in labato:

1. Aw bɛ joginw lajɛ fɔlɔ: Ni mɔgɔ dɔ gosira ni pilatiri walima kogo jalen binna, aw bɛ a lajɛ ni kunkolo joginna, kɔdimi, sɔgɔsɔgɔninjɛ, walima ɲɛ buguri, ani ka aw ka sigida wele kɔrɔtɔko nimɔrɔw (911 Ameriki ni Kanada, 112 Erɔpu tɔnba bɛɛ kɔnɔ, 999 Angletɛri) ni hakili bɔnɛ walima joli jugumanba dɔ bɔra a la.
2. Aw kana taama ka don binkannikɛlanw kulu kɔnɔ fo kuran panneau ka OFF: Kuran jalen min bɛ bin, o bɛ kuran kabɔriw ni ɲɔgɔndan kɛsu fangamaw tigɛ, ka nɛgɛ ɲɛnamaw su insulasi ɲiginnenw jukɔrɔ. Aw bɛ so ni sanfɛla karilanw wuli OFF kuran pankurunba la sani aw ka don a kɔnɔ.
3. Aw bɛ jiribolo walima jiribolo minnu bɛ kɛnɛ kan, aw bɛ olu sɛgɛsɛgɛ ka bɔ da la:
4. Ni jiribololanw ma tiɲɛ, u tilennen don, ani u jɔlen don: Dɛsɛ tun bɛ dan sanfɛla pankurun ma, wa boon jɔli bɛ sabati.
5. Ni jiribolo, jiribolo, walima jirisunba dɔ karilen don, a tigɛra, a tolilen don, walima a birilen don duguma: I bɛ structural framing failure sɔrɔ. Aw bɛ so min bɛ duguma ani so min bɛ sanfɛ yɛrɛ, aw bɛ o bɛɛ bɔ yen ka tugu an kɔ jɔli tiɲɛni ni a bincogo ɲɛminɛbaga ani nɛnɛba, jikuruw, ani so sanfɛlanw bincogo ɲɛminɛbaga.
6. Aw bɛ "widow-maker" lamini sɔgɔlenw jɛya ka ɲɛ: A ka ca a la, kogo jalen walima pilatiri ɲiginnenw kɛrɛ saba sɔgɔlenw bɛ to ka jɛngɛ dingɛ da lamini na. Aw kana baara kɛ o fɛnw jukɔrɔ abada. Aw bɛ so datugulen to ka ɲɛsin fɛnw labɛnni baarakɛlaw ma, walima aw bɛ aw jɔ kɔfɛ yɔrɔ la min tɛ mɔgɔ tɔɔrɔ, ka baara kɛ ni bere ye min janya ye mɛtɛrɛ 2,4 ye walasa ka lamini dawolo lafiyalenw sama ka jigin ka sɔrɔ aw bɛ fini gɛlɛn don, ka ɲɛkisɛw don ani ka ninakililan don.
7. Aw bɛ asiransi fotow ta SANI aw ka nɔgɔw don bɔrɔ kɔnɔ: Aw bɛ dingɛ min bɛ sanfɛla la, aw bɛ pipe walima so sanfɛlan min bɛ kɛnɛ kan a sanfɛ, aw bɛ binkannikɛlanw kulu jugumanba ta duguma, ani minɛnw walima dugumalan tiɲɛnen o fɛn.
8. Aw bɛ jisuma tolenw bɛɛ sama ka jigin duguma sanfɛla la min ma tiɲɛ kɛrɛfɛ: Tuma caman na, ji bɛ boli ka kɛɲɛ ni kɛrɛfɛla jalen ye, ka fibreglasi walima selilulozi batiw su minnu bɛ lafiɲɛ sanfɛla la min bɛ balo la. Ni aw ye insulasi ɲiginnen to a nɔ na, ​​o bɛ kɛ sababu ye ka sɛbɛnw kɛrɛfɛla bin sanga 24 kɔfɛ, ka a to nɔgɔ nɛrɛma toxic (Stachybotrys chartarum) ni Aspergillus ka kolo kɛ dingɛ kɔnɔ sanga 48 kɔnɔ. Aw bɛ insulasi ɲiginnen bɛɛ sama ka segin ka kɛ kolo jalen karamɔgɔya la.

--- .

Aw bɛ sanfɛla da wulilen ja walasa ka nɔgɔ ni duguma toli bali¶

Ni bɔgɔdaga dilanna, ka pankurun min sɔgɔlen don, o bɛ bɔ ka segin josi jalenw cɛmancɛw la, ani ni insulasi ɲiginnen donna bɔrɔ kɔnɔ, aw bɛ lɛrɛ 24 fo lɛri 48 finɛtiri sɔrɔ walasa ka joginda ni dugumalanw ja minnu bɛ kɛnɛ kan sani nɔgɔ ka falen (aw ye an ka nɔgɔ kɔfɛ ji tiɲɛni ɲɛminɛbaga).

1. Aw bɛ so sanfɛla da wuli fo jiri ji ka jigin ka tɛmɛ kɛmɛsarada la 15 kan: Aw kana kogo jalen kura siri abada jirisunw kan minnu ɲiginnen don. Ni aw ye dingɛ ɲiginnen dɔ datugu, o bɛ kɛ sababu ye ka nɔgɔ dogolenw falen ani ka structurel framing toli.
2. Aw bɛ fiɲɛbɔlanw laɲini sanfɛ ni degere 45 ye ka don jirisunw da wulilenw na: Aw bɛ kɛsu fiɲɛbɔlanw walima tapi fiyɛlanw bila duguma minnu ɲɛsinnen bɛ jirisunw ni dugumalanw ma minnu bɛ kɛnɛ kan.
3. Aw bɛ jisumalan dɔ boli so datugulen kɔnɔ: Aw bɛ kɛnɛma finɛtiriw datugu ani ka jibɔlan dɔ boli ka to ka nɛnɛ hakɛ minɛ kɛmɛsarada la 40 fo 50 duguma.
4. Aw bɛ jalen sɛgɛsɛgɛ ni jiri jisuma jateminɛnan ye min bɛ i n’a fɔ pinɛ, sani aw ka a jɔ kokura: Aw bɛ jiri ji jateminɛnan nimɔrɔma pini fila digi jiribolodalenw kɔnɔ ani sanfɛyɔrɔ jukɔrɔ:
5. Nɔgɔ hakɛ min ka ca ni 20% ye (MC): Lɔgɔ bɛ ɲigi fo ka se ka ɲɛgɛn tolilenw ni nɔgɔw dɛmɛ. Aw bɛ to ka ja.
6. 16% fo 19% MC: Danyɔrɔ jisuma; aw bɛ to ka a ja fo lɛri 24 fo lɛri 48 wɛrɛ.
7. 12% fo 15% MC: A farati tɛ ka borate walima banakisɛfagalan dɔ kɛ min sɛbɛnnen don EPA fɛ, ka insulasi jalen don a la, ka kogo jalen kura dulon.

--- .

Ɲininkali minnu bɛ kɛ tuma caman na¶

Ji bɛ min na, o bɛ se ka sɔgɔsɔgɔ fo ka se waati joli ma sani a ka bin pewu?¶

Jatebɔlan lakananen tɛ yen min bɛ kɛ ka ɲɛsin sanfɛla ma min bɛ sɔgɔsɔgɔ barisa dɛsɛ bɛ bɔ ni ji bɔli jɔra, ni pankurun janya, ani ni insulasi girinya min sirilen don. Panneau jalen saturated milimɛtɛrɛ 12,7 (1/2-inch) min bɛ insulation ɲiginnen dɛmɛ, o bɛ se k’a ka kurukuruw kunkolow sama ka bin miniti 15 fo sanga 6 kɔnɔ jisigilen kɔfɛ, ka sɔrɔ tariku jiri-lath plaster plaster bɛ se k’a ka bɔgɔdaga konnɛgɛw tigɛ ka kilo 200 (440 pounds) bɔgɔbɔgɔ bin o yɔrɔnin bɛɛ aw bɛ sanfɛla birilen o sanfɛla biri min bɛ ye, aw bɛ o minɛ i n’a fɔ a bɛ bin yɔrɔ min bɛ baara kɛ ani ka bɛɛ to kɛnɛma ka bɔ a jukɔrɔ.

Yala ne ka kan ka dingɛ dɔ da sanfɛlan jibɔlan dɔ kɔnɔ walasa ka ji bɔ a la wa?¶

Ɔwɔ, ni ani ni dɔrɔn ni o bɔgɔbɔgɔ ye latex penti kurukuru ye min bɛ sigida la, min bɛ se ka wuli walima ni jisumayɔrɔ fitinin ye bi san 1990 kɔfɛ kogo jalen kan, pankurun yɛrɛ ma biri yɔrɔ min na ka taa duguma, ani i kɛlen kɔ ka so kuran tigɛlanw faga i ka pankurunba la. Aw bɛ jɔ jiginyɔrɔ kɔfɛ ni degere 45 ye ni nɛgɛ walima nɛgɛbere ye min sirilen bɛ balawu bolo jan dɔ la walasa ka milimɛtɛrɛ 3 (insi 1/8) pini dingɛ kelen sɔgɔ bulonba duguma yɔrɔ la, ka tɛmɛ litiri 19 (galɔn 5) daga kan min bɛ ni tobilikɛlan ye aw kana jɔ bulon jukɔrɔ abada, aw kana a tigɛ ni muru ye abada, ani aw kana plastiki sɔgɔlen sɔgɔ abada.

Yala sotigiw walima sotigiw ka asiransi bɛ so sanfɛla binni sara, ji bɔli fɛ wa?¶

A ka c’a la, sotigiw ni sotigiw ka asiransi minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu bɛ so sanfɛla binni ni tiɲɛni min bɛ sɔrɔ o la, ni ji bɔra ko barikama ni balawu la, i n’a fɔ pibiliki nɛnɛman min pɛrɛnna, minɛn min falen don, walima so sanfɛla da min tiɲɛna sanfiɲɛ fɛ. Polisiw bɛ to ka ban fɔli la ni ladilikɛla dɔ ye dalilu sɔrɔ min b’a jira ko jibɔ bɛ kɛ dɔɔni dɔɔni, min ma jate (i n’a fɔ kalo caman kɔnɔ ji dibima bololanɛgɛw walima jirisunw tolilenw), ani asiransi b’a ɲini aw fɛ aw ka tiɲɛni wɛrɛw nɔgɔya joona ni aw ye jibɔlan datugu ani ka jibɔyɔrɔ ji bɔ walima ka a siri ka ɲɛ.

Yala jalen ɲiginnen min jiginna dɔɔni, o bɛ se ka segin ka wuli ni juruw ye ni a jara dɔrɔn wa?¶

Ayi, ni jipsi jalen ye ji caman minɛ ka ɲɛ walasa ka jigin ka yelen don so sanfɛlanw ni ɲɔgɔn cɛ (a ka ca ni milimɛtɛrɛ 6 fo 10 ye walima santimɛtɛrɛ 1/4 fo 3/8) walima k’a ka papiye sama ka ɲɛsin kurukuruw kunw ma, jipsi kristali kɔnɔna na, a jɔcogo ni a sirilen bɛ papiye ɲɛfɛla la pewu. Ni aw ye kogo jalen wulilenw gɛrɛntɛ ka segin san fɛ, o bɛ pankurun barikama dɔ to yen min bɛ insulasi ɲiginnenw ni nɔgɔ sɔgɔlenw minɛ a sanfɛla la; yɔrɔ o yɔrɔ min birilen don walima min ma kɛ ni lamina ye, o ka kan ka tigɛ ka bɔ joginda cɛmancɛ la ka taa joginda cɛmancɛ la, ka o bila a nɔ na, ​​karamɔgɔya jalen kɔfɛ ji hakɛ kɛmɛsarada la 15 jukɔrɔ.

--- .

Sosow sɛgɛsɛgɛra¶

• Sɛgɛsɛgɛli, saniya ani seginkanni baarada ka seereyaw (IICRC): ANSI/IICRC S500 sariya min bɛ ji tiɲɛni seginni baarakɛlaw ka baarakɛcogo kan (Ji danfara ni jalen sariyaw suguya 1, 2, ani 3).
• Gypsum Association (Amerika ni Kanada): GA-231 Ji tiɲɛni jateminɛni Gypsum Board la (fastener pull-through mechanics ani sag limits).
• National Park Service (NPS, Etazuni): Lakanali kunnafoni surun 21: Tariku flati plastiki, kogow ani plafond dilan (jiri lath ni plaster kilisi dɛsɛ).
• Amerika sigida lakanani baarada (US EPA) ani CDC: Gafe surun dɔ ka ɲɛsin nɔgɔ, nɔgɔ ani i ka so ma ani Ka i ka denbaya tanga asibiti sɔrɔli ma.
• Kɛnɛya ni Lakanali ɲɛmɔgɔba (HSE, Angletɛri): Asibɛti nafamafɛnw: finimuguw (Artex) minnu bɛ kɛ sanfɛla ni kogow kan.
• Federal Emergency Management Agency (FEMA, Etazuni): Ji tiɲɛni ni kuran faratiw ɲɛnabɔli sanjiba walima jibɔ kɔfɛ.

--- .

Gafe minnu bɛ tali kɛ o ko la¶

• So sanfɛla bɔgɔbɔli kunbɛnni ani tarping kɔrɔtɔlen
• Burst pipe shutoff ani ji kɔlɔsili kɔrɔtɔlen
• Tiɲɛni ni binkanni lasɔmini taamasiɲɛw
• Nɔgɔ ji tiɲɛni kɔfɛ: a kunbɛnni ni a saniyali bɛ kɛ sanga 48 kɔnɔ
• Asibiti tiɲɛni, plɔmu buguri, ani radɔn caman sɔrɔli
• Kɔrɔtɔko nimɔrɔw ɲɛbilasɛbɛn